The advantages of smart mirror touch control keys and light strips

Jun 25, 2021

Advantages of touch control keys:

Capacitive touch control keys work by using electrostatic capacitance generated between the human body and electrodes. They were first used in smart phones, and then widely used in household appliances, audio-visual equipment, automobiles, and industrial equipment. Because the touch control key does not require mechanical parts, it is very flexible to use and can even be installed on a hard curved surface. Based on Renesas Electronics' capacitive touch technology, the basic principle of touch control key detection and anti-interference technology.

1. Anti-fog: Smart mirrors can add anti-fog function, which is also one of the differences between smart bathroom mirrors and ordinary bathroom mirrors. After adding the anti-fog function, the mirror still has no water mist after each bath.

2. Waterproof: There is a power supply in the smart mirror, and many people worry that water will stick to it. In fact, there is no need to worry. The smart bathroom mirror is waterproof.

3. Anti-rust: The smart mirror is not easy to rust and has a long service life. This also means that you don't have to replace the bathroom mirror frequently because the surface of the mirror is rusty.

Advantages of LED strips:

LED strips refer to lamps that use light-emitting diodes as light sources. Usually, the semiconductor light-emitting diode is cured with silver glue or white glue on the bracket, and then the chip and the circuit board are connected with silver wire or gold wire, and the periphery is sealed with epoxy resin to protect the inner core wire. Finally, install the shell.

Light-emitting diode lamps have the advantages of energy saving, longevity, environmental protection, and impact resistance. They can directly emit light in seven colors and are often used in traffic signal lights, display screens, automobile signal lights and other fields. The light of the smart mirror also uses light-emitting diode lights.

1. Energy saving: the energy consumption of white light-emitting diodes is only 1/10 of that of incandescent lamps and 1/4 of that of energy-saving lamps.

2. Lifespan: The lifespan can reach more than 100,000 hours. For ordinary household lighting, this can be said to be "one and all".

3. Environmental protection, no mercury harmful substances, the assembly parts of the light-emitting diode bulb can be easily disassembled and assembled, and can be recycled by others but not by the manufacturer.

4. Light distribution technology expands the light-emitting diode point light source into a surface light source, expands the light-emitting surface, eliminates glare, sublimates visual effects, and eliminates visual fatigue.

5. Reduce line loss and do not pollute the power grid. Power factor ≥ 0.9, harmonic distortion ≤ 20%, electromagnetic interference conforms to global standards, reduces the power loss of the power supply line, and avoids the pollution of high-frequency interference to the power grid.

6. The light-emitting diode is basically a small chip encapsulated in epoxy resin, so it is very small and light.

7. The luminous efficiency can be as high as 80 m/w, the color temperature of various light-emitting diode lamps can be selected, the color rendering index is high, and the color rendering performance is good.

In many occasions in life or work, different lighting elements are often added to express beauty and themes. LED strips have always been favored by people. Although it is very simple, its effect is very charming in painting, and it can be the icing on the cake for the design of various indoor environments.

MOSEN has been in intelligent LED Mirror and mirror light for more than 10 years. Located in Ningbo, Only 1.5 hours away from SHANGHAI by train, with Ningbo port nearby, we have a very convenient traffic condition and for now covers an area over 8000 square meters for production and warehousing. MOSON is equipped with metal and acrylic processing facilities including CNC machine, digital cutting machines, polishing machines, LED lamp processing facilities including assembling lines, aging lines, integrating sphere and sufficient storage space, More than 1,200,000pcs of products are sold every year, Every 30 seconds, someone somewhere in the word buys one of our products.

Prev Next